Fault Finding Codes
Fault finding codes for the Betacom c range
Fault finding codes for the Betacom c range
| Codes | Description |
|---|---|
| Temperature 30 flashing | Fault on CH thermistor |
| Temperature 40 flashing | Fault on DHW thermistor |
| Temperature 50 flashing | Fault on outside sensor |
| Temperature 60 flashing | Low system pressure |
| Temperature 70 flashing | Fault on APS |
| Temperature 80 flashing | Overheat open circuit |
| Temperature 90 flashing | Flame or gas failure |
Faults which are not listed
Rapid modulation of the burner Check that the flue seal and restrictor has been fitted (restrictor depends on flue length)